Audi Q5 Owners & Service Manuals

Audi Q5: Engine oil

Audi Q5 Type 8R (2008 - 2017) Owner's Manual / Operating instructions / Checking and Filling / Engine oil

Engine oil specifications

The engine oil used must conform to exact specifications.

The service interval display in the instrument cluster of your vehicle will inform you when it is time for an oil change. We recommend that you have your oil changed by an authorized Audi Service Advisor.

If you have to top off the oil between oil changes, use the Audi oil quality standard specified in the table.

Checking and Filling

Using the proper engine oil is important for the functionality and service life of the engine. Your engine was factory-filled with a high-quality oil which can usually be used throughout the entire year.

Note

Your Limited New Vehicle Warranty does not cover damage or malfunctions due to failure to follow recommended maintenance and use requirements as set forth in the Audi Owner's Manual and Warranty & Maintenance booklet.

  • Use only a high quality engine oil that expressly complies with the Audi oil quality standard specified for your vehicle's engine. Using any other oil can cause serious engine damage.
  • Do not mix any lubricants or other additives into the engine oil. Doing so can cause engine damage.

Tips

If you need to add oil and there is none available that meets the Audi oil quality standard your engine requires, you may add a total of no more than 0.5 quart/liter of a high-quality "synthetic" oil that meets the following specifications.

  • Vehicles with gasoline engine: ACEA A3 or API SM with a viscosity grade of SAE 0W-30, SAE 5W-30 or SAE 5W-40.
  • Vehicles with diesel engine: ACEA C3 or API CF with a viscosity grade of SAE 0W-30 or SAE 5W-3O.
  • For more information about engine oil that has been approved for your vehicle, please contact either your authorized Audi dealer or Audi Customer Relations at 1 (800) 822-2834 or visit our web site at www.audiusa.com or www.audicanada.ca.

    READ NEXT:

     Engine oil consumption

    The engine in your vehicle depends on an adequate amount of oil to lubricate and cool alt of its moving parts. In order to provide effective lubrication and cooling of internal engine components, al

     Checking the engine oil level

    Fig. 198 Display: Oil level indicator Read oil level Park your vehicle so that it is horizontally Level. Shut the engine off when it is at operating temperature. Switch only the ignition back on.

     Adding engine oil

    Fig. 199 Engine compartment: cover on the engine oil filler neck Before you check anything in the engine compartment, always read and heed all WARNINGS. Shut the engine off. Unscrew the cap to th

    SEE MORE:

     Suspension Strut, Removing and Installing

    Special tools and workshop equipment required Spreader Tool -3424- Torque Wrench 1331 5-50Nm -VAG1331- Torque Wrench 1332 40-200Nm -VAG1332- Engine/Gearbox Jack Adapter - Wheel Hub Support -T10149- Engine and Gearbox Jack -VAS6931- Removing - Remove the wheel. - Remove the addition

     Door Inner Cover, Removing and Installing

    1 - Cover - Remove the door trim panel. Refer to → Body Interior; Rep. Gr.70; Rear Door Trim Panels; Rear Door Trim Panel, Removing and Installing. - Remove the wiring harness -4- from the bracket -5-. - When removing the cover, always start at the top.

    © 2019-2024 Copyright www.audiq5.net