Audi Q5: Starting/stopping the engine
Applies to vehicles: with Start-Stop-System
Fig. 104 Instrument duster: Engine switched off (stop
phase)
- Slow the vehicle to a stop using the brake and
keep pressing the brake pedal. The engine will
switch off. The
indicator light appears in the
instrument cluster display and
also
appears in the trip computer.
- When you take your foot off the brake pedal,
the engine restarts. The indicator light turns
off.
Additional information
The engine will switch off in the P, D/S and N positions
as well as in manual mode. In the P position,
the engine will also remain off if you take
your foot off the brake pedal. The engine starts
again when you select another selector lever position
and take your foot off the brake pedal.
If you select the R position during a Stop phase,
the engine will start again.
Shift from D/S to P quickly to prevent the engine
from starting unintentionally when shifting
through R.
You can determine for yourself if the engine will
stop or not by reducing or increasing the amount
of force you use to press the brake pedal. For example,
if you only lightly press on the brake pedal
in stop-and and-go traffic or when turning, the
engine will not switch off when the vehicle is stationary.
As soon as you press the brake down
harder, the engine will switch off.
Tips
- Press the brake pedal during a stop phase to
keep the vehicle from rolling.
- The ignition will turn off if you press the
button during a
stop phase.
- The image in the display is slightly different
in some models.
General information
Applies to vehicles: with Start-Stop-System
The standard Start-Stop-mode can be cancelled
for different system-related reasons.
Fig. 105 Instrument cluster: Engine-Stop temporarily unavailable
Engine will not switch off
Before each stop phase, the system checks if certain
conditions have been met. For example, the
engine will not be switched off in the following
situations:
- The engine has not reached the minimum required
temperature for Start-Stop-mode.
- The interior temperature selected by the А/С
system has not been reached.
- The outside temperature is extremely high/low.
- The windshield is being defrosted.
- The parking system is switched on.
- The battery charge level is too low.
- The steering wheel is sharply turned or there is
a steering movement.
- After engaging the reverse gear.
- On sharp inclines.
appears in the instrument cluster display and
also appears in the trip computer.
Engine automatically restarts
The stop phase is interrupted in the following situations,
for example. The engine restarts without
any action by the driver.
- The interior temperature varies from the temperature
selected in the А/С system.
- The windshield is being defrosted.
- The brake pedal is pressed several times in a
row.
- The battery charge level becomes too low.
- High power consumption.
appears in the instrument cluster display and
also appears in the trip computer.
Switching the ignition off automatically
To prevent the battery from draining, the ignition
will switch off automatically when all of the following
conditions have been met:
- The vehicle has already been driven.
- The engine has been turned off by the Start-Stop-
System.
- The driver's door is opened.
- The driver's seat belt is removed.
- The brake pedal is not pressed down.
- The vehicle is stationary.
In this case, the activated low beam will be replaced
by the side marker lights. The side marker
lights will switch off after approximately 30 minutes
or when you lock the vehicle.
If the Start-Stop-System has not turned off the
engine or if you have switched the Start-Stop-System off manually, the ignition will not be automatically
switched off and the engine will continue
to run.
WARNING
Never allow the engine to run in confined
spaces - danger of asphyxiation.
Tips
If you shift into the D/S or N positions after
shifting into reverse, the vehicle must be driven
faster than 6 mph (10 km/h) in order for
the engine to switch off again.
READ NEXT:
Applies to vehicles: with Start-Stop-System
If you do not wish to use the system, you can
switch it off manually.
Fig. 106 Center console: Start -Stop-System button
To switch the Start-Stop-System
Overview
The speed warning system helps you to keep your
driving speed below a set speed limit.
The speed warning system warns if the driver exceeds
a previously stored maximum speed. A
warning tone w
Switching on
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph (30
km/h).
Fig. 108 Control lever with push-button
Fig. 109 Display: Selected speed
Pull th
SEE MORE:
Fig. 224 Left side of the cockpit: fuse panel with plastic
clip
Fuse panel A (black)
Dynamic steering
ESC control module
А/С system pressure sensor, electromechanical
parking brake, HomeLink, automatic
dimming interior rearview mirror, air
quality/outside air sensor, ESC button
Sound ac
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Piston Resetting Tool -T10145-
Brake 1LB/1LC with Shims. Refer to → Chapter "Brake Pads, Removing and
Installing, Brake 1LB/1LC with Shims"
If old brake pads are being replaced with new ones, then it is ne