Audi Q5: Roof rack
Description
Additional cargo can be carried with a roof luggage
rack.
If luggage or cargo is to be carried on the roof,
you must observe the following:
- Only a specially designed roof rack may be used
on your vehicle roof. This is provided with your
vehicle.
- These roof racks are the basis for a complete
roof rack system. Additional attachments are
necessary if you want to transport luggage, bicycles,
surf boards and skis. All these components
are available at your authorized Audi
dealer.
Note
If you use other roof luggage rack systems or
do not install the racks as intended, any damage
to the vehicle is not covered by the warranty.
Always read the manufacturer installation
instructions that came with your roof
rack system when you install the attachments.
Tips
When installing a factory-supplied roof rack
system on the roof railing, the ESC will adapt
itself to a different center of gravity.
Attachment points
The roof rock can only be attached at the
marked locations.
Fig. 81 Roof rack attachment points
Attach the roof rack only at the attachment
points on the roof railing. On the inside of the
roof railing there are two holes for attaching the
rear end of the roof rack. To prevent confusing
the front and rear roof rack attachments, there
are three holes on the left and two holes on the
right for mounting the front part of the roof rack
> fig. 81.
The roof racks have a sticker on the left side underneath
to identify front and rear.
WARNING
When installing the roof rack, make sure the
sticker is on the left side of the vehicle and
faces the stamped arrow in the drive direction.
READ NEXT:
Fig. 82 Roof railing: positioning the roof rack
Fig. 83 Roof railing: installing a roof rack
The roof rack set consists of a front and rear roof
rack, the cover profile and a socket wrench.
Open t
The cargo on the roof must be securely attached.
Handling characteristics change when cargo is
transported.
The permissible roof load for your vehicle is
165 lbs (75 kg). The roof load is the total o
Fig. 85 Center console: Front cupholders
Fig. 86 Beverage storage in the rear armrest
Front cupholders
You can accommodate two beverages in this
storage > fig. 85.
Opening rear beverage holde
SEE MORE:
Overview - Front Center Armrest
1 - Spring Nut
Quantity: 2
2 - Cover
Clipped with -item 5-
3 - Lower Trim
For the hinge arm
Clipped with -item 7- and
-item 8-
Removing and installing. Refer to
→ Chapter "Hinge Arm Trim, Removing and Installing".
4&nb
The rear view camera system assists the driver during backup
driving by providing the driver with an image of the traffic
situation behind the vehicle via the Front Information Display
Control Head -J685-.
The rear view camera system is switched on when engaging the
reverse gear. The system can